Kohler One Piece Fill Valve

How to Replace the Fill Valve in Your KOHLER Toilet

A Step-by-Step Guide

Introduction

If you're experiencing issues with your KOHLER toilet, such as constantly running water or a weak flush, it's likely that the fill valve needs to be replaced. Replacing the fill valve is a relatively simple task that can be completed in under an hour. In this guide, we will provide you with step-by-step instructions on how to replace the fill valve in your KOHLER toilet.

Materials Needed

• Replacement fill valve
• Wrench
• Adjustable pliers

Step-by-Step Instructions

1. Shut Off the Water Supply

Locate the water supply valve behind the toilet and turn it off. Flush the toilet to drain the tank.

2. Disconnect the Water Supply Line

Using an adjustable pliers, loosen the nut that connects the water supply line to the fill valve. Disconnect the water supply line.

3. Remove the Old Fill Valve

Using a wrench, loosen the nut that holds the fill valve in place. Remove the fill valve.

4. Install the New Fill Valve

Insert the new fill valve into the hole in the bottom of the tank. Tighten the nut to secure it.

5. Reconnect the Water Supply Line

Connect the water supply line to the new fill valve. Tighten the nut to secure it.

6. Turn on the Water Supply

Turn on the water supply valve behind the toilet. Allow the tank to fill.

7. Adjust the Fill Valve

Once the tank is full, adjust the fill valve to ensure that it shuts off at the correct water level.

Conclusion

Replacing the fill valve in your KOHLER toilet is a simple task that can be completed in under an hour. By following these step-by-step instructions, you can save money and ensure that your toilet is functioning properly.